 |
SIG CA Adhesives |
| Order No. |
Type |
Size |
Order No. |
Type |
Size |
| SIGCA001 |
Thin |
14.2 g (.5 oz) |
SIGCA002 |
Thin |
28.4 g (1 oz) |
| SIGCA003 |
Thin |
56.7 g (2 oz) |
|
|
|
| SIGCA010 |
Medium |
14.2 g (.5 oz) |
SIGCA011 |
Medium |
28.4 g (1 oz) |
| SIGCA012 |
Medium |
56.7 g (2 oz) |
|
|
|
| SIGCA019 |
Thick |
14.2 g (.5 oz) |
SIGCA020 |
Thick |
28.4 g (1 oz) |
|
|
|
| SIGCA021 |
Thick |
56.7 g (2 oz) |
|
|
| |
| SIG CA THIN |
| Sig CA Thin is thin as water and cures very fast, normally in 1-3 seconds. Thin CA is used to glue together parts that fit tightly
together with no gaps, and that do not require repositioning after the glue is applied. Typically, the two parts are mated first, and then Thin CA is flowed along the joint.
Capillary action wicks the Thin CA deep into the joint, resulting in a very strong bond. Thin CA is the only glue that should be used with SIG Easy Hinges |
| SIG CA MEDIUM |
| Sig CA Medium is medium viscosity and normally cures in about 5-15 seconds. Medium CA is the general purpose favorite,
excellent for almost any step during construction. Many people use it for the majority of their construction. Can be used on less than perfect joints, filling in the minor
gaps between the parts. |
| SIG CA THICK |
| Sig CA Thick has a thick, syrupy viscosity and a slow setting time, normally curing in 30-90 seconds. Typically, Thick CA is
applied to one part before mating to the other part. Longer cure time allows you a few seconds to position the part before the Thick CA “goes off”. Cure can be
quickened with the use of “accelerator” once the part is positioned. The thick consistency reduces the tendency to run and fills gaps between parts. Ideal for gluing
large parts like wing sheeting and fuselage doublers. Can also be used to build up strong fillets around joints requiring extra strength. |