Activator/accelerator for instant (cyanoacrylate) adhesives in aerosol packaging. Used to accelerate the curing of instant adhesives in conditions unfavourable to their natural curing (reaction with air moisture or water contained in the glued parts) in dry environments, in cold conditions, when glueing inactive materials or when applying a thick layer of adhesive. The product contains a proprietary polymerization activating component of the instant adhesive, solvents and propellant gas (propane/butane). For this reason, it must not be used when bonding materials that are not resistant to organic solvents (e.g. polystyrene foam).
Application: the accelerator is applied from a distance of 20–25 cm on clean and dry surfaces, the optimum working temperature range is +10 °C to +30 °C. It can be applied in one of two basic ways:
Suitable for: instant adhesives when bonding organic solvent-resistant materials.
Not suitable for: polystyrene foam and other materials that are not resistant to organic solvents or elevated temperatures (accelerated polymerisation of the adhesive can release significant amounts of heat, leading to heating of the bonded joint and its surroundings - the greater the amount of adhesive used).
Storing: in a tightly closed container, in a cool, dry and dark place (at +5 °C to +25 °C). Do not expose to temperatures below +2 °C.
Shelf life: under proper storage conditions, we guarantee a shelf life of 1 year in the unopened original packaging, while maintaining the above product properties.
The product contains substances classified as dangerous within the meaning of Regulation (EC) No 1272/2008. For detailed information see the section "Downloads".
The product contains substances classified as dangerous within the meaning of Regulation (EC) No. 1272/2008.
Danger
Contains: acetone
Extremely flammable aerosol. Pressurised container: May burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness.
Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Avoid breathing spray. Use only outdoors or in a well-ventilated area. Wear protective gloves/protective clothing/eye protection. Store locked up. Protect from sunlight. Do no expose to temperatures exceeding 50 °C. Dispose of contents/container to by disposing in a hazardous waste receptacle.
Repeated exposure may cause skin dryness or cracking.
UFI: A2JW-UMX4-110G-WXAG