Code:3BD1000
Barcode:8596450010178
Brand:FOXY

FOXY 180 4.5V brushed motor

Brushed electric motor size "180" with nominal voltage 4.5V. Operating voltage 3.7–7.4V, 12600 RPM at nominal voltage. Diameter 17.1mm, housing length 18mm, shaft diameter 1.5mm, weight 16g.
This item is not available in you region (United States)
Description

Brushed electric motors of „FOXY Brushed“ range are perfect for a whole lot of model builder's applications - for powering aircraft, boat, car, tank and other ground vehicle models either with direct drive or with a  gearbox.
When connecting and installing foxy motors, pay attention to the allowed voltage and load current limit.

Motor cooling: operating temperature of the housing shouldn't exceed 80°C. The model should always have sufficient air intake and air-flow around the motor. For boat models, we recommend using water cooling.  High motor loads are possible only for short periods. After every driving/riding/flying session, you should let the motor cool down to a room temperature before the next ride/flight/drive.

FOXY 180 4.5 V is a brushed electric motor size "180" with a shaft with a diameter 1.5mm and plain bearings. It is suitable for powering indoor aircraft models with direct drive (3x1.2" propeller) or with a gearbox for a small car and boat models.

For controlling the RPM, you will need an ESC with a load capacity of 3–6A.

FOXY 180 4.5V is a suitable replacement for a motor SPEED 180 4.5V (product number 6392).

Set contains:

  • Brushed electric motor FOXY 180 4.5V
  • User manual

Voltage (jmenovité) [V]4.5
Voltage (provozní) [V]3.7 - 7.4
RPM at rated voltage [ot./min]12600
ESC [A] 3 - 6
Diameter [mm]17.1
Length (skříně) [mm]18
Shaft diameter [mm]1.5
Free shaft length [mm]3
Weight [g]16
© 2024, KAVAN Europe s.r.o.