Code:3BD1020
Barcode:8596450010215
Brand:FOXY

FOXY 500 Race 7.2V brushed motor

Brushed electric motor size "540" with nominal voltage 7.2V. Operating voltage 3.7–12V, 23500 RPM at nominal voltage. Diameter 36mm, housing length 50mm, shaft diameter 3.175mm, weight 189g.
This item is not available in you region (United States)
Description

Brushed electric motors of „FOXY Brushed“ range are perfect for a whole lot of model builder's applications - for powering aircraft, boat, car, tank and other ground vehicle models either with direct drive or with a  gearbox.
When connecting and installing foxy motors, pay attention to the allowed voltage and load current limit.

Motor cooling: operating temperature of the housing shouldn't exceed 80°C. The model should always have sufficient air intake and air-flow around the motor. For boat models, we recommend using water cooling.  High motor loads are possible only for short periods. After every driving/riding/flying session, you should let the motor cool down to a room temperature before the next ride/flight/drive.

FOXY 500 Race 7.2 V is a brushed electric motor size "540" with a shaft with a diameter 3.175mm and plain bearings. It is suitable for powering indoor aircraft models with direct drive (5x5" propeller) or with a gearbox for a small car and boat models (30mm propeller).

For controlling the RPM, you will need an ESC with a load capacity of 30–40A.

FOXY 500 Race 7.2V is a suitable replacement for a motor SPEED 500 Race 7.2V (product number 7306).

Set contains:

  • Brushed electric motor FOXY 500 Race 7.2V
  • User manual

Voltage (jmenovité) [V]7.2
Voltage (provozní) [V]3.7 - 12
RPM at rated voltage [ot./min]23500
ESC [A] 30 - 40
Diameter [mm]36
Length (skříně) [mm]50
Shaft diameter [mm]3.175
Free shaft length [mm]12.5
Weight [g]189
© 2024, KAVAN Europe s.r.o.