The hot new spring addition to the KAVAN family of RC hand-launch gliders is the Strike DLG. This powerful Czech-made rascal can be built "the old-fashioned way" from a builder's kit of CNC pre-cut parts, so it requires at least basic skills with classic construction. With the right choice of electronics and a little patience it fits into the 250g category, and despite its 1498mm wingspan it is well transportable. So you can give your body a good workout with discus launches on the go. For finishing, we recommend using 6g pico servos, a 1S LiPo battery and at least a 4-channel RC ki

A brand new KAVAN Vibe has just parked in our hangar. An untamed 3D aerobatic foamie biplane that guarantees good vibrations. It has a 1080 mm wingspan, is equipped with a 350–500W brushless motor, and you use at least a 4-channel RC kit to control it. Seasoned pilots will appreciate the high performance and excellent performance in 3D savagery. The less experienced will set smaller rates, and a full F3A pattern will be confidently learned. The Vibe is available in orange, blue or green scheme.

The KAVAN V20 is a 24-channel RC kit using a 2.4GHz simultaneous dual-frequency transmission system with full telemetry support (Twin 2.4GHz). It boasts a superior response time of up to 4ms and a range of up to tens of kilometres. You can also choose ACCST D16 or ACCESS transmission systems, also with telemetry. The V20 can therefore be paired with a wide range of KAVAN or FrSky receivers, telemetry or not, with classic PWM and S.BUS outputs. It is suitable for both advanced and sport pilots. Excellent for controlling various aircraft models or heli/multicopters. It can also be easily set u

We have added new German-made dispersion adhesives KAVAN SUPER to our offer. The new formula, carefully tested by KAVAN team pilots and our aircraft designers, has better sandability than the original one. The shelf-life is also extended. Waterproof. Quick-setting. Packed in 100g and 200g bottles.

The official distribution of XL Power, the top-class RC helicopter manufacturer, is now in the hands of the KAVAN Team. We are looking forward to our cooperation and hope We are in for a long and exciting flight. With almost two decades of competing and over a decade in manufacturing, XLPower know their RC helicopters. And now We are bringing these beasts to our fans all over Europe.

We would like to introduce new KAVAN telemetry receivers. The six-channel R6 uses the ACCESS and ACCST D16 RF protocols. It weighs only 4.2 g and measures 33×15×9.7 mm, so it can be used in small models. The advanced eight-channel R8 uses the Twin 2.4GHz system. Other features include smart pairing, a black box for preserving basic flight data, or up to 24-channel mode using S.BUS. Both are also available in a vario version. The planned stocking is in February.

We now offer 75 top servos of the MKS brand. You will find among them servos for model aeroplanes, cars, helicopters or specially designed for gliders. You will also appreciate the wide range of speeds and torques, from super-fast micro servos to servos with torque up to 68 kg·cm. In a nutshell, you can choose waterproof, narrow-band, super-fast, super-strong, plastic-box, aluminium-box servos and so on. MKS servos are already available for pre-order. The planned stocking of all types is around December 15. We will keep you informed about the exact stocking.

Now parked in our garage are KAVAN GRIP's new GRT-10 Thunder monster trucks and GRT-10 Lightning truggies. Both beginners and advanced drivers appreciate the combination of durability, handling and performance. They have four-wheel drive, you can choose between brushed and brushless motors, and all variants are available in blue or red livery. Get out into the wild. Independent suspension and oil dampers ensure maximum stability and a smooth ride on rough surfaces. The gearbox and both differentials are encased, making them more resistant to the usual wear and tear. All you need to buy is

We have added brand new KAVAN Pixie hand-launch gliders to our offer. We supply them as quick-build kits, ready to fly "straight out of the box". They are made of expanded polypropylene (EPP), so destroying a PIXIE takes a lot of work. We offer 3 colour variants, plus a set of blank white variant with 5 waterproof acrylic markers for the youngest creatives. PIXIE is also ready to be electrified and converted into a fully radio-controlled model.

New in the KAVAN garage are KAVAN Tracker monster trucks in 1:16 scale for the youngest racers. They have a simple and robust chassis design. This makes them resistant to impacts and crashes, which are unavoidable in the beginning. The all-wheel drive, deep tread tires and independent wheel suspension reliably tackle any obstacle. The heart is a 390- size DC motor and 850mAh 7.4V 2S LiPo battery. The maximum speed can be conveniently limited directly on the transmitter.

The hottest new helicopter model in our hangar is the brand new M4 Max by OMPHOBBY. The new super-powerful variant has, just like the "M-four", a 120° CCPM swashplate with a flybarless rotor head. The new more powerful brushless motor directly drives the 945mm main rotor. The tail rotor on an extended carbon tail spar is driven via a wider-toothed belt for reliable transmission of all that power. The kits are available in 3 colours, either with motor only or including servos and speed controller.

We have expanded our line of KAVAN PRO CA superglues to include specialized tyre adhesives. They are available in medium and thin consistencies, in either 20g or 50g bottles. Available are also sets of both types with an accelerator spray. 20g adhesives come in a kit with a 150ml accelerator, and in the 50g variant kit, you will find a 200ml accelerator.

We are expanding the KAVAN GO range with several brand-new digital servos. From pico servos with a thrust of up to 1 kg·cm to programmable super strong large servos with a thrust of up to 74 kg·cm. A hot one amongst the additions is the super strong fast GO-1088MGW in a waterproof aluminium box with a clever new design. It is suitable for large-scale aircraft models, helicopters, 1:5 scale cars, boats, etc. At the IMAC 2023 European Championships in Leszno, Poland, pilot Werner Kohlberger from Austria won the gold medal in the Unlimited category with his electric Slick X360. The un

We have added the ARF (Almost-Ready-To-Fly) variant of our popular RC hand-launch glider KAVAN Cumul DLG to our aircraft range. In the set, you will find already assembled and foil-covered balsa parts - wings, empennage and fuselage. Just assemble and install the electronics. You can get your Cumul ready for take-off in one evening.

A semi-scale model of the legendary Swiss STOL utility aircraft, the Pilatus PC-6 Porter with a 1500 mm wingspan has a fully mechanized wing with ailerons and flaps and a robust carbon-reinforced EPO foam structure. Featuring a C3548-750 brushless motor with a 10x6" three-blade propeller and a 40A ESC, it certainly doesn't lack power for really short takeoffs with wheeled landing gear or tuning floats. Add a good transmitter, a 4S 2600–3300 mAh LiPo and you're ready to fly. The kit is produced with the official permission of Pilatus Aircraft Ltd.

We care very much about the development of modelling as an industry. Balsa is the bread and butter of every model builder and manufacturer. That is why we now offer you high-quality balsa KAVAN directly from the plantation. At very affordable prices.

New to the KAVAN battery range are 7.2V NiMH packs with Tamiya® connectors. They are ideal for 1:10 scale RC cars or other land vehicles, boats or aircraft. They are available in 2000, 3000, 4000 and 5000 mAh capacities. They offer a high discharge current of 20 A (peak up to 40 A) and feature low internal resistance and long life. Other new additions are the high-end LiPo batteries in the „Air-pack“ design. They are tailor-made for the OMP M1 Evo and M2 Evo mini helicopters. But they can also be used reliably in other aircraft or helicopter models. They have a discharge rate of 60

Newly in our assortment, you will find a quality modelling knife KAVAN. A small cutting pad with a working area of 18×4 cm is included in the package. Of course, there is also a set of 5 spare blades.

The electric bubble remover MIBO by KAVAN is a practical helper for every RC driver. It serves to effectively remove air bubbles from oil in the shock absorbers or differential. This maximizes running consistency and efficiency and reduces foaming. At the touch of a button. Available in two versions, MB-7201 - for category 1/10 on-road and off-road models, and MB-7202 for 1/10 and 1/8 off-road models. Replacement shock and differential mounts, power cable and plexi hatches are also available separately.

We are expanding our Brushless PRO motor range with the 2225-1600 model. This miniature 14-pole electric motor is designed to power small models with a flight weight of up to 450 g, especially two-meter motor gliders of the RES category - KAVAN Mirai/Mirai V.